keyestudio CNC kit(CNC Shield V3.0 +keyestudio Uno R3+4pcs DRV8825 Driver / GRBL Compatible)

$22.00

Availability: In stock

Keyestudio CNC Shield V3.0 can be used as driver expansion board for engraving machines. It has total 4 channel slots for DRV8825 stepper motor driver modules (not included) for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.  

Put your Static Block here.

Product Description

Wiki: http://wiki.keyestudio.com/index.php/Ks0286_keyestudio_CNC_Kit_/_CNC_Shield_V3.0_%2Bkeyestudio_Uno_R3%2B4pcs_DRV8825_Driver_/_GRBL_Compatible

Introduction

Keyestudio CNC Shield V3.0 can be used as driver expansion board for engraving machines. It has total 4 channel slots for DRV8825 stepper motor driver modules (not included) for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.  

Specification

1.Latest Keyestudio CNC Shield Version 3.0
2.GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
3.4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
4.2 x End stops for each axis (6 in total)
5.Spindle enable and direction
6.Coolant enable
7.Uses removable Pololu DRV8825 compatible stepper drivers. (A4988, DRV8825 and others)
8.Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
9.Compact design.
10.Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
11. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Kit List

Keyestudio CNC Shield V3.0 *1
Keyestudio Uno R3 Board *1
DRV8825 Driver *4
USB Cable *1

Product View - Custom Info

This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.

Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.

Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.

Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions and Answers

add your question

There are no entries.