keyestudio MQ-7 Gas Sensor for Arduino

$5.50

Availability: In stock

The sensitivity of MQ-7 gas sensor to carbon monoxide is quite high, so it can be used to detect various gas containing carbon monoxide. It is a low-cost sensor suitable for a variety of applications.
Download Attachment
pdfMQ-7 Carbon Monoxide Gas Sensor PDF(212.98 KB )Download

Put your Static Block here.

Product Description

WIKI: http://wiki.keyestudio.com/index.php/Ks0045_keyestudio_MQ-7_Carbon_Monoxide_Gas_Sensor

Video: http://www.keyestudio.com/wp/2016/05/ks0040-keyestudio-mq2-analog-gas-sensor-module/

 

Introduction

The gas sensitive material used in MQ-7 gas sensor is SnO2, which is of lower electrical conductivity in clean air. It detects carbon monoxide with low temperature (heated by 1.5V) through high-low temperature cycles. The electrical conductivity of the sensor increases with the increase of the carbon monoxide concentration in the air. The change of electrical conductivity can be converted to the output signal corresponding to that of the gas concentration by using a simple circuit.

The sensitivity of MQ-7 gas sensor to carbon monoxide is quite high, so it can be used to detect various gas containing carbon monoxide. It is a low-cost sensor suitable for a variety of applications.

Feature

* good sensitivity to carbon monoxide.
* long service life, low cost
* simple drive circuit

Application

* household gas leak alarm
* Industrial-level carbon monoxide gas alarm
* Portable gas detector

Specification

Target gas: carbon monoxide
Detectable concentration: 300-10000ppm CO
Loop voltage Vc: ≤10V DC
Heating voltage VH: 5.0V±0.2V ACorDC(hight); 1.5V±0.1V ACorDC(low)
Load resistance RL: adjustable
Heating resistance RH: 31Ω±3Ω(Room temperature)
Heating power PH: ≤350mW
Surface resistance of sensitive material R: 2KΩ-20KΩ(in100ppmCO)
Sensitivity S: Rs(in air)/Rs(100ppmCO)≥5
Concentration slope: α ≤0.6(R300ppm/R100ppm CO)
Temperature, humidity: 20℃±2℃; 65%±5%RH
Standard test circuit: Vc:5.0V±0.1V; VH(high): 5.0V±0.1V; VH(low): 1.5V±0.1V

Product View - Custom Info

This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.

Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.

Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.

Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions and Answers

add your question

There are no entries.