Nowadays, WiFi is seen everywhere in our daily life and Arduino microcontrollers are getting more and more popular.
The keyestudio ESP13 shield is particularly designed for Arduino microcontrollers to connect the WiFi.
It adopts industrial grade chip ESP8266. It is ESP-13 with metal shield, with strong anti-interference ability.
The pin is compatible with the main control board such as Arduino Uno and Mega2560. Meanwhile, it uses the voltage conversion chip when connecting the Arduino MCU, which compatibles with 3.3V and 5V.
The serial port of the shield is controlled by a dual-dial switch, so that it can be used alone as an Arduino MCU expansion board or as an ESP8266 shield.
It configures WiFi and serial parameters based on Web Server.
It can not only be used as an independent ESP8266 development board, downloading official AT command firmware, NodeMCU open source firmware and so on, but also can be used as a stand-alone Arduino UNO shield, with all leadout pins.
Support wireless 802.11 b/g/n standards.
Support STA/AP working modes
Built-in TCP/IP protocol stack, able to configure a socket.
Support standard TCP/UDP Server and Client.
The serial port baud rate supporting 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps.
Serial port data: 5/6/7/8 bits
Serial Parity check: None
Serial port stop bit: 1/2 bit
Standard Arduino Uno/Mega pin pitch
Breaks out Arduino Pin 2/3/4/5/6/7/8/9/10/11/12/13
ESP8266 GPIO 0/2/4/5/9/10/12/13/14/15/16/ADC/EN/UART/ TX/UART RX/UART
KEY button for multiplexing configuration function
Two DIP switches enable extended switching between the Arduino and ESP8266 serial ports.
WiFi operating current: continuous transmission≈700mA(200mA MAX), standby <200uA.
Wireless transmission rate: 110-460800bps
Working temperature: -40℃ ~ +125℃
Product View - Custom Info
This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.
Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.
Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.
Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.
Questions and Answers
There are no entries.