L298P Shield DC motor driver adopts the L298P driver chip wich is exclusively made for large-power motor. It can drive 2 DC motors directly with a drive current reaching 2A. The motor output is equipped with eight high-speed schottky diode as protection. This driver carries neat circuit layout and bonded components, in addition, the multi-layer design enables it to be plugged to Arduino directly.
L298P Shield DC motor driver carries PWM mode. The motor can be powered via Arduino VIN input or terminal input on the driver, which are switchable by jumper.
1. Logic part input voltage : VD: 5V
2. Driving part input voltage VS: VIN input 6.5 ~ 12V, PWRIN input 4.8 ~ 24V
3. Logic part working current Iss: ≤36mA
4.Driving part working current Io: ≤ 2A
5. Maximum dissipation power: 25W (T=75℃)
6. Control signal input level:
High level: 2.3V ≤ Vin ≤ 5V
Low level: -0.3V ≤ Vin ≤ 1.5V
7. Working temperature: -25℃～＋130℃
8. Driver form: Dual power H bridge driving
According to wiring method above, we can control the transferring, reversing, stopping of two DC motor (M1 and M2), as well as the speed regulation of PWM.
Product View - Custom Info
This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.
Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.
Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.
Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.
Questions and Answers
There are no entries.