X
0
Your position: Home / Sensors / Other Sensor

Keyestudio APDS-9930 Attitude Sensor Module for Arduino

KS0267
Price:
Quantity:
-
+
(191 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Features
  • Documents
  • Reviews

Keyestudio APDS-9930 attitude sensor module mainly uses APDS-9930 chip. APDS-9930 in a single 8 pin package can provide the ambient light sensor which is compatible with I2C interface and the infrared LED proximity sensor. The ambient light sensor uses double light diode to approximate the visual response of low lumen human under 0.01 lux illumination, and its high sensitivity allows the device to operate in the back of dark glass.

The proximity sensor which is completely adjusted can detect 100 mm object, and exempt the factory calibration requirements of terminal equipment as well as sub-components. From the bright sunlight to the dark room, proximity sensor’s proximity detection function can operate well. This module added micro optical lens can provide infrared energy efficient transmission and reception, which can reduce the overall power consumption. In addition, its internal state machine can make the device into a low power mode, bringing a very low average power consumption.

Optical module integrated with ALS, infrared LED and proximity detector;

Ambient Light Sensing,similar to the human eye’s visual response;  

Programmable interruption function with upper and lower thresholds;

Up to 16-bit resolution;

High sensitivity of operation in the back of dark glass;

0.01lux low lumen performance;

Proximity detection, fully calibrated to 100 mm detection;

Integrate infrared LED and synchronous LED driver;

Eliminate factory calibration for proximity sensors;

Programmable waiting timer, waiting state’s power consumption - 90μA (typical value);

Programmable range is from 2.7 milliseconds to 8 seconds;

Compatible with I2C interface, up to 400kHz (I2C fast mode);

Dedicated interruption pin;

Sleep mode power - 2.2μA (typical value).

Working Voltage:DC 3.3-3.8V

Output Current:0-20mA

Temperature Range:-40℃—85℃

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:autoparts
Message Us