X
0
Your position: Home / Arduino / Controller Board

Keyestudio UNO R3 Development Board Compatible With Arduino Uno R3 +USB Cable

KS0001
Fully compatible with the Arduino official version
High-quality manufacturing process from Keyes
USB cable with signal shield
Nice packaging
A good after-sales service
Price:
Quantity:
-
+
(46 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Features
  • Documents
  • Reviews(120)

keyestudio Uno R3 is a microcontroller board based on the ATmega328 (datasheet), fully compatible with ARDUINO UNO REV3.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Note that the two ICSP headers are separately used to program the firmware to ATMEGA16U2-MU and ATMEGA328P-PU, but generally the two chips have been programmed well.
The Uno R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter.
The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with.

1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board.
Stronger RESET circuit.
Atmega 16U2 replace the 8U2.

Specification:
Microcontroller: ATmega328P 
Operating Voltage: 5V 
Input Voltage (recommended): 7-12V 
Digital I/O Pins: 14 (of which 6 PWM output) 
Analo g Input Pins: 6 
DC Current per I/O Pin: 20 mA 
DC Current for 3.3V Pin: 50 mA 
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
SRAM: 2 KB 
EEPROM: 1 KB 
Clock Speed: 16 MHz 

Average rating: 5.0 based on 120 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:autoparts
Message Us