FOR NEW USERS
$2.00
Create an account and start your journey as a maker!
Register Now
FOR NEW USERS
X
0
Your position: Home / 3D printer / CNC Series

Keyestudio CNC Shield V4.0 Board For Arduino Nano

KS0152
26 Review(s) Sold:93
Wholesale:
5-9
$6.70
10+
$6.30
Quantity:
-
+
(186 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Features
  • Documents
  • Reviews(26)

keyestudio CNC shield V4 is used as driving shield for engraving machines, fully compatible with NANO control board . So you just need to stack the Nano board onto the shield when using.
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project.
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.

KS0152  3D KS0152  3D V4 (1)

KS0152  3D   V4  (3)

KS0152  3D KS0152  3D V4 (2)KS0152  3D KS0152  3D V4 (7)KS0152  3D KS0152  3D V4 (5)KS0152  3D KS0152  3D V4 (4)

 

 

 

  • NANO control board compatible

  • Supports the software GrblController361Setup

  • Can drive the X/Y/Z-axis stepper motors

  • Control the drive module via jumper cap. (Note: If connect the A4988, unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)

  • Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.

  • You can directly plug 3 stepper motor drive modules into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).

  • The enabled port (EN) of all drive modules has been connected to D8.

  • Can supply the power for 3 stepper motor drive modules and Nano board via an external power jack (DC 12V).

  • Other communication ports, like the serial communication, I2C communication.

Average rating: 5.0 based on 26 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:autoparts
Message Us