X
0
Your position: Home / Sensors / Analog Sensor

Keyestudio Turbidity Sensor V1.0 With Wires Compatible with Arduino for Water Testing

KS0414
Price:
$18.00
Quantity:
-
+
(1161 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Features
  • Documents
  • Reviews(6)

The keyestudio turbidity sensor detects water quality by measuring level of turbidity.
The principle is to convert the current signal itself into the voltage output through the circuit.
Its detection range is 0%-3.5% (0-4550NTU), with an error range of ±05%F*S.
When using, measure the voltage value of sensor’s Signal end; then work out the water’s turbidity by simple calculation formula.
This turbidity sensor have both analog and digital signal output modes.
The module has a slide switch. When slide the switch to A end, connect the signal end to analog port, can read the analog value to calculate the output voltage so as to get the turbidity degree of water. If slide to D end, connect signal end to digital port, can detect the water whether is turbidity by outputting HIGH or LOW level.
You can turn the blue potentiometer on the sensor to adjust the sensitivity of sensor.
Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.
Note: the top of probe is not water-proof; can only place the transparent bottom part into water.

 

ks0414-5ks0414-6ks0414-2ks0414-3ks0414-4

  • Operating Voltage: DC 5V

  • Operating Current: about 11mA

  • Detection Range: 0%--3.5%(0-4550NTU)

  • Operating Temperature: -30℃~80℃

  • Storage Temperature:-10℃~80℃

  • Error Range: ±0.5%F*S

  • Weight: 18g

Average rating: 5.0 based on 6 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:autoparts
Message Us