Create an account and start your journey as a maker!
Register Now
Your position: Home / 3D printer / 3D Printer Parts

Free shipping! 5PCS/LOT Keyestudio DRV8825 driver for 3 D printer

    Please select the information you wantX
(902 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Features
  • Documents
  • Reviews

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2-45V and can deliver up to approximately 1.5A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

  • Suitable for driving stepper motors within 8.2V~45V 2.5A;

  • Simple step and direction control interface;

  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step;

  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates

  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay);

  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout;

  • Short-to-ground and shorted-load protection.

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Message Us