FOR NEW USERS
$2.00
Create an account and start your journey as a maker!
Register Now
FOR NEW USERS
X
0
Your position: Home / Arduino / Controller Board

Keyestudio UNO R3 Development Board Compatible With Arduino Uno R3 +USB Cable

KS0001
Fully compatible with the Arduino official version
High-quality manufacturing process from Keyes
USB cable with signal shield
Nice packaging
A good after-sales service
120 Review(s) Sold:501
    Please select the information you wantX
Quantity:
-
+
(941 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Features
  • Documents
  • Reviews(120)

KEYESTUDIO UNO R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analo g inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 programmed as a USB-to-serial converter.

 

Package includes: 
1 x UNO R3 Development Board 
1 x USB Cable 



1. Pin of changes: next to the AREF pin both I2C-pin (SDA and SCL, just Analo g 4 and 5 of the copy, not the additional I2C interface), plus the two next to the RESET pin, one IORE fallow expansion board voltage on board, this pin expansion board 
just told the on board voltage (such as R3 5V, can be seen as the power pins copy, does not provide the level pull), the other is later Scratch placeholder pin.

2. More stable RESET circuit. The RESET key position has changed, which has been moved to the corner near the USB interface board, more convenient and press. 

3. The ATmega16U2 instead 8U2, and that does not mean that the 16K flash of R3 make your code run faster, this update is a service of the USB interface chip, 

theoretically it UNO can simulate USB the HID, such as MIDI / Joystick / Keyboard. 
 

Specification:
Microcontroller: ATmega328P 
Operating Voltage: 5V 
Input Voltage (recommended): 7-12V 
Digital I/O Pins: 14 (of which 6 PWM output) 
Analo g Input Pins: 6 
DC Current per I/O Pin: 20 mA 
DC Current for 3.3V Pin: 50 mA 
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader 
SRAM: 2 KB 
EEPROM: 1 KB 
Clock Speed: 16 MHz 

Average rating: 5.0 based on 120 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:autoparts
Message Us